1560 Black Stack Thermometer Readout

Iconic Engineering Limited

1560 Black Stack Thermometer Readout is one of the most versatile, cost-effective & accurate readouts that you are looking for.

In stock

The 1560 Black Stack thermometer readout can be any kind of thermometer you want it to be, and it works in three distinctive ways.

It’s a reference thermometer with an accredited calibration; it’s an automated calibration system reading your reference probe and sensors you’re testing; or it’s a high-accuracy data acquisition system. And it does each of these functions better than any other thermometer currently on the market.

The Stack consists of up to eight different modules that fit together to do any type of thermometry you choose. You can buy all of them, or any combination of them, and change the Stack and its functions anytime you want. Each module stacks behind the preceding one, and when you add a module, the Stack’s software automatically reconfigures itself to include all of the new functions supplied by that module. There’s nothing to take apart. No boards need to be installed.

There’s no software to load, and nothing has to be calibrated. Just stack a new module onto the back of the previous modules and you’re ready to use the Black Stack and all of its remarkable features.

Specifications: 1560 Black Stack Thermometer Readout

Specifications
Model 1560 Base Unit	Power: 100 to 240 VAC, 50 or 60 Hz, nominal; Attachable Modules: up to 8; Display: 4.25" x 2.25" LCD graphics, LED backlight, adjustable contrast and brightness; Automatic Input Sequencing: 1 to 96 channels; Communications: RS-232; Non-volatile Memory: channel sequence, probe coefficients; Minimum Sample Time: 2 seconds.
Extended Communication Module 3560	The Extended Communication Module adds additional communication interface capability to the system. This module includes a GPIB (IEEE-488) interface, Centronics printer interface, and analog output. The GPIB interface connects the 1560 to a GPIB bus. GPIB can be used to control any function of the 1560 and read measurement data. The printer interface allows the 1560 to send measurement data directly to a printer. The analog output sources a DC signal (±1.25 VDC) corresponding to the value of a measurement.

Resistance Modules
.	Input Channels	Resistance Range	Basic Resistance Accuracy	Resistance Resolution	Temp. Range	Equivalent Temperature Accuracy†	Temp. Resolution	Excitation Current
SPRT Module 2560	2	0Ω to 400Ω	±20 ppm of reading (0.0005Ω at 25Ω, 0.002Ω at 100Ω)	0.0001Ω	–260°C to 962°C	±0.005°C at 0°C ±0.007°C at 100°C	0.0001°C	1.0 mA, 1.4 mA
High-Temp PRT Module 2561	2	0Ω to 25Ω	±50 ppm of reading (0.00013Ω at 2.5Ω)	0.00001Ω	0°C to 1200°C	±0.013°C at 0°C ±0.018°C at 100°C	0.001°C	3.0 mA, 5.0 mA
PRT Scanner 2562	8	0Ω to 400Ω	±40 ppm of reading (0.004Ω at 100Ω)	0.0001Ω	–200°C to 850°C	±0.01°C at 0°C ±0.014°C at 100°C	0.0001°C	1.0 mA, 1.4 mA
Standards Thermistor Module 2563	2	0Ω to 1 MΩ	±50 ppm of reading (0.5Ω at 10 KΩ)	0.1Ω	–60°C to 260°C	±0.0013°C at 0°C ±0.0015°C at 75°C	0.0001°C	2 µA, 10 µA
Thermistor Scanner 2564	8	0Ω to 1 MΩ	±100 ppm of reading (1Ω at 10 KΩ)	0.1Ω	–60°C to 260°C	±0.0025°C at 0°C ±0.003°C at 75°C	0.0001°C	2 µA, 10 µA
1000Ω PRT Module 2567	2	0Ω to 4 KΩ	±25 ppm of reading (0.025 at 1 KΩ)	0.001Ω	–260°C to 962°C	±0.006°C at 0°C ±0.009°C at 100°C	0.0001°C	0.1 mA, 0.05 mA
1000Ω PRT Scanner 2568	8	0Ω to 4 KΩ	±40 ppm of reading (0.04 at 1 KΩ)	0.001Ω	–200°C to 850°C	±0.01°C at 0°C ±0.014°C at 100°C	0.0001°C	0.1 mA, 0.05 mA

Thermocouple Modules
.	Input Channels	Millivolt Range	Millivolt Accuracy	Millivolt Resolution	Temperature Accuracy,^† Ext. CJC	Temperature Accuracy,^† Int. CJC	Temperature Resolution
Precision Thermocouple Module 2565	2	–10 to 100 mV	±0.002 mV	0.0001 mV	±0.05°C	±0.1°C	0.001°C^††
Thermocouple Scanner 2566	12	–10 to 100 mV	±0.004 mV	0.0001 mV	±0.1°C	±0.3°C	0.01°C
^†Temperature accuracy depends on probe type and temperature ^††Actual temperature resolution may vary depending on measurement noise, thermocouple sensitivity, and input average

Includes: 1560 Black Stack Thermometer Readout

Model Name	Description
1560	Black Stack Readout Base Unit
2560	SPRT Module, 25 Ω and 100 Ω, 2-channel
2561	High-Temp PRT Module, 0.25 Ω to 5Ω, 2-channel
2562	PRT Scanner Module, 8-channel
2563	Standards Thermistor Module, 2-channel
2564	Thermistor Scanner Module, 8-channel
2565	Precision Thermocouple Module, 2-channel
2566	Thermocouple Scanner Module, 12-channel
2567	SPRT Module, 1000 Ω, 2-channel
2568	PRT Scanner Module, 8-channel, 1000 Ω
3560	Extended Communications Module
5610-6-X	Thermistor Probe, 3.2 mm dia x 152.4 mm (0.125 in x 6 in), 0 °C to 100 °C, Lead wire length (Cable) 6 ft (Calibration traceable to NIST standards included) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5610-9-X	Thermistor Probe, 3.2 mm dia x 228.6 mm (0.125 in x 9 in), 0 °C to 100 °C, Lead wire length (Cable) 6 ft (Calibration traceable to NIST standards included) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5626-12-X	Secondary Standard PRT (0.25 in dia x 12 in), 100 Ω, –200 °C to 661 °C (17025 accredited calibration included. Traceable to NIST standards.) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5626-15-X	Secondary Standard PRT (0.25 in dia x 15 in), 100 Ω, –200 °C to 661 °C (17025 accredited calibration included. Traceable to NIST standards.) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5628-12-X	Secondary Standard PRT (0.25 in dia x 12 in), 25 Ω, –200 °C to 661 °C (17025 accredited calibration included. Traceable to NIST standards.) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5628-15-X	Secondary Standard PRT (0.25 in dia x 15 in), 25 Ω, –200 °C to 661 °C (17025 accredited calibration included. Traceable to NIST standards.) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
5642-X	Standards Thermistor Probe (Calibration traceable to NIST standards included) X = termination. Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).

Accessories common to all models:

Accessory	Description
9302	Rugged Carrying Case for these models: 1560 Black Stack Thermometer Readout and up to five modules 9133 Portable IR Calibrator
2380-X	Miniature Thermocouple Connectors
2381-X	Standard Thermocouple Connector
2382	RTD/Thermistor Connector
1929-2	System Verification, PRT with Readout, Accredited. Choose two temperature points, extra points at additional cost. Available temperature points are –197 °C, -80 °C , –39 °C, 0.01°C, 30 °C, 157 °C, 232 °C, 300 °C, 420 °C, 500 °C, 660 °C.
1929-2	System Verification, PRT with Readout, Accredited. Choose two temperature points, extra points at additional cost. Available temperature points are –197 °C, -80 °C , –39 °C, 0.01°C, 30 °C, 157 °C, 232 °C, 300 °C, 420 °C, 500 °C, 660 °C.
1929-5	System Verification, Thermistor with Readout, Accredited. Choose two temperature points; extra points at additional cost. Available temperature points are -30 °C, -20 °C, -10 °C, 0 °C, 10 °C, 20 °C, 30 °C, 40 °C, 50 °C, 60 °C, 70 °C, 80 °C, 90 °C, 100 °C.
1930	System Calibration, PRT with Readout, Accredited. Choose PRT temperature range for the calibration. Available temperature ranges are –200 °C to 500 °C, –200 °C to 420 °C, –80 °C to 420 °C, –40 °C to 420 °C, –40 °C to 232 °C, 0 °C to 420 °C.
1935	System Calibration, Thermistor with Readout, NVLAP-accredited Choose thermistor temperature range for the calibration. Available temperature ranges are 100 °C span (6 points over span), 60 °C span (7 points over span), 100 °C span (11 points over span).
2560	SPRT Module, 25 and 100 2-channel
2562	PRT Scanner Module, 8-channel
2566	Thermocouple Scanner Module, 12-channel
2568	PRT Scanner Module, 8-channel, 1000 Ω
3560	Extended Communications Module
9935-S	Software, LogWare II, Single User
9938	MET/TEMP II Software
Priority Gold Instrument CarePlan	Fluke Calibration Priority Gold Instrument CarePlans are available for most calibration products.
Silver CarePlan	Fluke Calibration Silver CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote.